What Is Ghost 2 Immobiliser Reviews And How To Use It?

· 6 min read
What Is Ghost 2 Immobiliser Reviews And How To Use It?

Ghost 2 Immobiliser

Ghost is a wireless security system that protects against key-cloning. It connects to the ECU unit through the CAN data network. It's quiet and can't be recognized by thieves.

It can only be deactivated by entering a specific button sequence (like PIN code) that you've programmed using the buttons in your vehicle, such as those on the steering wheel or center console.

Guards Your Car from Theft

With car theft increasing and cars being stolen in mere seconds, it is important that car owners consider the additional security options that are available to them. Immobilisers are one of the most effective and most established ways to ensure your vehicle's security. Ghost immobilisers are a good alternative because they are small, hidden within the wires of your vehicle, and don't emit radio frequency signals. This means they are not traceable and may be installed without affecting your vehicles CAN bus system.

Our ghost immobiliser in your area is only deactivated by the pin code that we installed at the time of installation. This unique sequence of disarming uses buttons on your steering wheel or doors to stop anyone from driving away with your car. This makes it impossible for thieves to duplicate your key or use jamming/spoofing equipment that can disable normal immobilisers.

Not only will a ghost immobiliser block your vehicle from being driven however it also prevents the car from being stripped to make parts. This is a growing issue in the UK because of the popularity of these kinds of automobiles. It can happen in less than a minute. TTW ghost immobilisers can be easily programmed to protect vehicles from attacks like this.

If you have our ghost 2 immobiliser installed near me it will stop your vehicle from being stolen at a service station or even when it is being driven by an employee while your car is on the lift at the garage. The Ghost can be set to Service/Valet Mode, which allows you, the consumer to select a unique button combination.

Contact us today if would like to learn more about our Ghost immobilisers or if you'd like a no-cost estimate. We'll be glad to assist and provide you with assurance that your vehicle is secured at all times.

No Key Fobs or LED Indications To Give Away Its Location

Make sure your vehicle is protected from the latest types of car theft with this non-detectable immobiliser which is integrated into your vehicle's CAN data network. In contrast to other CAN immobilisers that are sold by aftermarket, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it makes use of buttons found in the standard factory controls that are already in your vehicle such as the ones on the steering wheel, door panels and the centre console. This means a hidden pin code is created which must be entered before your vehicle will start which makes it totally undetectable to thieves.

The CAN-BUS immobiliser's developers have added additional security methods to protect the device from being breached or hacked. It also provides CAN-BUS blockage and a physical immobiliser cut meaning that even if your keys were stolen, the criminal cannot drive away with your pride and joy.

Installing the CAN-BUS into your vehicle is a simple and quick process that takes only 30 minutes. We will have someone from our team in your area to arrange an appointment time and location that suits your needs. Once your vehicle is fitted, you will be given an identification number and security codes for your phone as well as the app to make it simple to use and ensure you are always in control of your car's security.

The system is compatible with a wide range of modern vehicles, however if you own a vintage or specialized vehicle, please contact us to confirm compatibility. The Ghost Immobiliser 2, with installation included is priced at APS449; your car will be added to the International Security Register if installed by one of our approved installers. If you have any questions do not hesitate to get in touch with our helpful staff. We look forward to receiving your call soon.



Easy to Setup and Programming

Modern vehicles are often equipped with immobilisers to stop thieves from hot-wiring or stealing your car. Unlike physical deterrents like lock locks for the steering wheel or wheel clamps, an immobiliser is hidden inside your vehicle, making it virtually impossible to find and defeat.

The system connects directly to the CAN data network in your vehicle and prevents it from starting until you enter a unique code. The device is compact and sealed, meaning it can be installed anywhere inside your vehicle, without the need for additional wiring. It doesn't emit radio frequency signals, therefore it can't be detected by scanners or other code-grabbing equipment.

Ghost utilizes the buttons on your steering wheel, door panels, and the central console of your car to create a customized (like pin code) disarm sequence which must be entered in order to start your car. The pin code sequence can be altered at any time and is dependent on four to twenty button presses. You can even put your vehicle in Service/Valet Mode, so that it is still operable but will not be able to start or drive. This will ensure that your vehicle is safe when you take it in for servicing or valet parking. Also, make sure that the mechanic isn't able to access your pin code to disable your system.

You can make use of our app to create temporary pins for your ghost device in the event that you plan to be away from your vehicle for a prolonged period of time like an extended work or holiday. You can enter your pin manually when driving the vehicle.

Our CAN bus immobiliser can be linked to an electronic remote key fob or tracker (Brand dependant) that will have precedence over the ghost system. This will provide extra security in the event that your vehicle is stolen or if your keys are lost.

Contact us today to discuss how we can protect your vehicle from key cloning and hacking. We provide our services all over the UK and also at our dedicated install centre in Derby.

Service/Valet Mode

Modern vehicles have sophisticated eco systems, including stop/start functions that require the correct inputs to function properly. For example batteries, voltages as well as engine temperatures, external temperatures and which electrical systems are in operation. Sometimes, these can cause issues and can often be difficult to diagnose if it is Ghost related or not. This is especially true if the vehicle was recently cleaned or valet parked. If this is a problem you can go into the ghost mode which allows the vehicle to start and drive without the need for a pin. This is useful when your car is being serviced by an independent garage or valet-parked.

To enter service mode simply press the button for service 5 times. The indicator light will flash twice to show that service mode is in effect. You can leave this mode at any time using a PIN number. After you have exited the service mode the Ghost immobiliser is restored to normal operation.

This is a very discrete system that communicates with the vehicle ECU via the CAN data circuit. It connects directly to the original buttons of the vehicle and does not use radio frequency signals, as do other immobilisers. This makes it near impossible for any other device to bypass or hack or jam devices that use spoof codes to mimic an original key fob are not a problem for this system.

It is an TASSA certified anti-theft system that meets the highest standards of protection. This includes an exclusive vehicle marking system that connects to the international security register, which is a requirement for insurance companies.

The ghost immobiliser has a very small form factor and is easily hidden within your vehicles factory wiring and is nearly impossible for thieves to locate.  ghost ii immobiliser  is a sealed unit that is so small it can be installed in a variety of different places in the vehicle, including under the dashboard or on the steering wheel.

The system utilizes buttons on your vehicle, like those on the steering wheel, door panels, or centre console to allow you to create a unique and changing disarm sequence of up to 20 presses that must be completed to start your vehicle. Anyone with your unique pin code is able to enter it, so you, your family, your colleagues, or friends can use it.